Self Adhesive Pressure Sensitive Seal Press Cap Liners Foam Seal For Bottle Jar

Product Description :

1). Diameter range is 7mm-300mm;
2). Thickness can choose 1.0mm, 1.2mm, 1.8mm, 2.0mm;
3). Used for sealing of PE, PET, PP, metal bottles, glass bottles, porcelain bottles

Features:

* Those Pressure Sensitive Self-sealing Liners are coated with torque-activated adhesive. No heat induction equipment or tools needed.

* Seal is activated by the pressure of applying the lid and will adhere within 12-24 hours. * Single-use safety seal peels easily from container, indicating tamper evidence.

* Printed with black text "Sealed for your protection".

Features of Pressure Sensitive Seal Press Cap Liners

1. Tamper-Evident Seal:

Security: These liners create a visible indication of tampering by adhering securely to the container's rim when pressure is applied during cap closure. Any attempt to open the container after the liner has been pressed will break the seal, providing clear evidence of tampering.

2. Pressure-Sensitive Adhesive:

Activation: The liners utilize a pressure-sensitive adhesive that activates when the cap is pressed onto the container. This adhesive forms a tight bond with the container's rim, ensuring a reliable seal without the need for additional heat or equipment.

3. Versatility in Application:

Compatibility: Pressure Sensitive Seal Press Cap Liners are compatible with a wide range of container materials, including plastic, glass, and metal. They can be used across various industries such as food and beverages, pharmaceuticals, cosmetics, and chemicals.

How to use:

1: Place the liner onto the opening of the bottle/jar. Make sure the rim is dry, clean and smooth.

2: The one side with word should be the upper side.

3: Twist your cap onto the bottle. Leave in place for 20 minutes. This gives the adhesive time to release leaving the liner attached to the rim. 4. You will see the liner sealed closely onto the rim of the bottle/jar opening after you take off the outside cap 20 minutes later.

Attentions:

■The bottle mouth should be free water, oil and other impurities. ■The bottle mouth should be flat and free from defects or bumps. ■The bottle mouth and cap gap size should less than 1.2mm, in this way, screw on the cap,the gasket can better fit the bottle. ■The bottle mouth should be fully screwed and no gap left. ■The adhesive seal coat shall be kept clean and free from dirt. ■After sealing,please place it in the environment below 21 ℃ to avoid high temperature or direct sunlight.

Self Adhesive Seal Cap Liners

Pressure Sensitive Seal Cap Liners

Foam Seal Cap Liners

Self Adhesive Pressure Sensitive Seal Press Cap Liners Foam Seal For Bottle Jar Images